This wheel slid on ice into a tall curb at a 45 degree angle at about 10 miles per hour. The axle, control arm, and knuckle were replaced.
Friday, August 19, 2011
How to Check and Repair a Damaged Front End on a 2003 Pontiac Grand Am and related models
Tuesday, July 26, 2011
When are Wheel Spacers Desperately needed for Your Vehicle?
Rim spacers happen to be an uncomplicated strategy to make space between your rims and steering mechanisms such as tie rods as well as brake calipers. A good number rim spacer vendors utilize a high-grade aluminum, and have weight as well as tire size ratings for their spacers. There are actually literally hundreds of places to find spacers, and also there are several thicknesses on the market today.
Friday, July 1, 2011
Shipping Your Luggage by Parcel or Freight Services - Pointers and Assist
Article Source: http://www.articlesbase.com:80/news-and-society-articles/shipping-your-luggage-by-parcel-or-freight-services-pointers-and-assist-4673863.html
Tuesday, June 7, 2011
Saturday, May 14, 2011
Grind to shape the new front steering knuckle tabs #189
With the steel plates drilled and cut to fit on the MR2 front steering knuckles, I need to trim them up and make them fit and look better. I bolted all 4 of them together and grinded them smooth and clean.
Wednesday, April 20, 2011
Orient River Inc. OR-711 Universal Steering Knuckle Spreader Tool for BALL-JOINT separator
This tools is designed , patented and manufactured by Orient River Inc. This video is shot by Orient River and any copy or alteration of the content are strictly not allowed. Use to spread the steering kunckle to enable the removal and fitting of shock absorbers without the risk of damaging the aluminum or cast iron knuckle. Made of durable chrome-moly steel for added stregth Applied on a wide range of vehicles.
Sunday, March 27, 2011
How-To replace Dana 30 and 44 Ball Joints part 3 of 3 (steering knuckle installation, preload)
See many more videos on www.bleepinjeep.com Part 3 of 3 on how to replace Dana 30 or Dana 44 Ball Joints. This vid deals with installing the steering knuckle and handling the preload spacer.
Wednesday, March 2, 2011
Roger's TTC '10 Obstacle Course 3
Roger giving it hell on the obstacle course before timing out due to a broken rockwell steering knuckle.
motion activated sprinkler parabolic microphone chocolate trivia
Sunday, February 6, 2011
10.5 LM main at Newreds hobbies
Some of the 10.5 latemodel main from 04/24/10 at the awesome Newreds hobbies indoor dirt oval track facility. Look at me getting a wheel knocked off at the 30 second mark, Yikes! I thought I had tangled with another car until I viewed this video and then I realized I wrecked myself and actually caused the hit that broke my right front axle clean off. That's a 3/16ths inch aluminum axle and it snapped clean of at the steering knuckle, Whaaacccckkk! Oh well I was getting my Arrrrrse handed to me that day anyway. I'll be back another day to try again. Makes me think of a song, You picked a fine time to leave me loose wheel. I think that's how it goes???? :-)
Thursday, January 13, 2011
Golf Strong Grip - Realizing You Need to Fix Your Grip to Fix Your Score
Arguably the most important part - or at least the most discussed one - of anyone's golf game is their grip. Usually, everyone - during their first try at golfing - never gets their grip on the golf club correct. There is no, one, EXACT way to hold and grip a golf club, but there are some steps you can take to ensure that you're gripping your club correctly.
The majority of golfing pundits out there who know what they're talking about agree that a strong, firm grip is a good one. You don't want to go and turn your knuckles white or anything, but in golf, strong grip is definitely a good thing.
Basically, you always want your hands to be turned more so to the right and underneath the club than anything else. This makes it easier for you to keep your clubs square throughout your entire swinging motion. Also, you should lose the tendency to roll the face open during the first couple feet of your swing stroke with this method as well.
If you want to hit the ball long and do so often, then a strong grip is certainly for you. In golf, strong grip is used primarily for the power hitters who's main strategies rely on them driving the bar as fall as humanly possible on each holes first shot.
Having a golf strong grip is certainly not the only way to go as there are many professional players with notoriously weak grips. But should you think your strategy lies more in hitting the ball farther and straighter than doing anything else particularly well, then it would behoove you to tighten up your golf strong grip more than it already is.
In the end, you just want to find what works for you and stick with it. Everybody plays golf and swings their clubs differently and it's no surprise that everyone grips their clubs differently as well. If it works, then keep doing it and if it doesn't than do everything you can to change it and change it correctly!
Monday, December 20, 2010
Easy Guide to Ball Joint Replacement
In motor vehicles, ball-in-socket joints degrade in performance just like their human counterparts. Note that dirt and lack of lubrication in the interior of your car's moving parts will prompt the demise of your car as a whole. Here is an easy guide to joint replacement.
Ball joints are the fundamental connectors between the axle assembly and the steering linkage. Usual use and abuse of the vehicle will wear down the ball joints immediately. If you are a do-it-yourself buff, you'll be delighted to know that you can perform the replacement task successfully with due diligence. Remember that replacing original parts and equipment of joints calls for patience and attentiveness.
It's easier to do the replacement if your car is a typical front-wheel-drive, which has single joint per slide. Older vehicle models and trucks frequently have both lower and upper joints on each side, thus a hydraulic press is necessary to accommodate the upper joints.
In any form of car component replacement, it's best to purchase name-brand parts. Since there are many manufacturers, choose parts that are manufactured by a reputable company.
To diagnose the health of your car's joints, you should study the inspection tips available online. If you detect any slop, immediately replace the joint. You should release the swaybar endlink if necessary. Disconnect the old joint's cotter pin as well as castellated nut. Then, with the use of a pickle fork or prybar, separate the ball joint and reinsert the stud placed in the knuckle.
While many shops make use of air chisel for joint replacement, you can utilize a drill instead. You should check your service manual to learn about the right sizes for drilling out ball joint rivets without denting the control arm. Get the ball joint by hauling the control arm down for clearance. With a rubber boot, grease fitting, castellated nut, and cotter pin, you can then install the new ball point.
Friday, November 26, 2010
Sportsstuff U Slalom 2 (53-1965)
Shop online today at www.sportsstuff.com Look out the Doables are here! Learn to control your every move with the amazing new VEER tow system! Lean left or right to Slalom from side to side across the wake with these new Skill Tubes! You control it. Features * VEER Towing System for Slaloming from Side to Side Across the Wake (Patent Pending) * Tiger Tooth Spinning/ Steering Fins * Heavy-Gauge PVC Bladder * Heavy-Duty Full Nylon Cover with Zipper * High Visibility Custom Graphics * Aluminum Quick Connect Tow Point * Double Webbing Foam Handles with Knuckle Guards * Exclusive Patented Speed Safety Valve for fast inflation and deflation
Tuesday, November 2, 2010
Life's a Journey Not a Destination - Enjoy Your Commute
I was driving on the highway the other day and a sign said, "Enjoy Your Commute". I thought to myself, "Thank-you, I am", and not just the road I was driving on, but the road of life.
Sure, there are still moments or days where I feel like I've hit a pothole, so to speak, where I wasn't able to steer away from that one. Some are a little bigger than others, in fact, a few may even seem like the Grand Canyon, but the difference is I now remember that the road of life is under construction as well as paved with gold.
It wasn't always that way though. There were many years where I felt I was always taking detours, or stuck in the traffic of negative thoughts, or feeling the road rage inside myself or the receiver of someone else's, or my internal GPS system had completely shut down and I was lost, or questioning if the passengers in my life received their licenses from a Cracker Jack Box. Then I questioned my own and realized perhaps I also received mine from there.
You see, life is an ongoing journey, not a destination, and how much or little you enjoy the commute is really up to you.
Think of your life like a highway. Sometimes you can set the cruise control and motor right along and other times you are stuck in a traffic jam, or having to take the next exit, or there's an unexpected delay and you are stuck, or the weather is a little tricky and your knuckles are a little white as you grip the steering wheel with all your might.
You might even be like the driver in who's tooting his horn, or yelling at other drivers, or telling them how they should drive, or not letting them in, or cutting them off all together.
Perhaps you want to be like Mario Andretti on the race track and speed through to the finish line.
You can't control the road conditions, or the events that occur in your life, but you can steer the way you encounter and move through them.
You can slow down, take a look around, and open yourself up to the miracles and mysteries that life has to offer you.
You can choose to see the negatives or the positives.
You can enjoy the simplest of pleasures throughout the day, or none at all.
You can be thankful for what you have or bemoan what you don't have.
You can reach out or go it alone.
You can believe or give up.
You can embrace or brace yourself.
You can find a different route or stay on the one you are on.
You can choose to stay stuck or move through what's occurring.
You can be the light or the darkness.
You can be of peace or war.
You can be victorious in your life; or the victim of life or the victor over life, the choice is yours.
It's up to you whether your journey is about the destination, or the enjoyment of your commute.
Yes, it would be nice to get up and never endure a road block, to know exactly where you are going, or what the future holds for you, but if that was the case you would miss all the wonder, adventures, excitement, joys and sorrows along the way.
These are the very things which provide you with the dreams, tools, skills, and experience to build other roadways.
Remember, the journey you're on, we are all on together, and its roads are under construction.
How can you enjoy more of your commute?
Use the insight technique to assist you in gaining insights when you hit those potholes that can make your journey more fun and enjoyable.
Saturday, October 9, 2010
Chrysler 300c front suspension popping/clunking noise
My Chrysler 2005 300c suspension is making popping/clunking noises on the drivers side when making slow turns. The noise in the vid is being amplified with Steelman wireless Chassis Ears. In this vid a transmitter is hooked to the lower control arm. I have since replaced the sway bar endlinks, so they are not the cause of the noise. I don't think the noise is from the inner or outer tie rod ends, steering rack, upper control arm, knuckle/ball joints, or brakes, since the noise is less noticeable when the transmitters are connected to these locations. Tension struts were recently replaced, so they shouldn't be the problem. But the noise is heard when the transmitters are located to every suspension component (except the steering rack), so it is difficult to determine the exact cause of the noise.
Wednesday, September 15, 2010
Sunday, August 22, 2010
dropping 993 bearings into uprights
dropping cold bearings into a pair of front porsche 993 RS uprights after having heated them in the oven, 30 mins at 200 degrees C
Thursday, July 29, 2010
How to Sail a Boat Better - Use the Secret of Course Averaging For Easier Steering
How many times have you tried to steer an accurate magnetic compass course in a small cruising sailboat, only to be pushed or pulled off course time and again? On reaches, you have a lot more weather helm. It seems just when you get steady on course, a gust of wind or playful wave pushes the boat off course again.
Solve this problem with the secret of course averaging. This method allows the boat to wander off course at specific intervals of time. It removes the fatigue of white-knuckle steering and gives you more accuracy too. You will stay on course line like a locomotive glued to a railroad track! Follow these three simple steps:
1. Determine a convenient time interval
To make averaging work, you need to time each "wandering" interval. Any interval will do the trick, but it's easier to pick even units of 10--such as 10 minutes, 20 minutes, or 30 minutes.
2. Wander between 0 degree and 10 degrees to one side
Pick one side of the course line to start wandering. Let's say we decide to wander on the left side. Glance at your watch and then steer between 0 to 10 degrees to the left of the course line. Watch your time like a hawk! You want to change course as soon as your time interval runs out.
3. Wander to the other side of the course line
Change course to the opposite side of the course line. Glance at your watch again. In our example, we change course to the right and wander 0 to 10 degrees to the right of the course line. We will do this for exactly 10 minutes because that's how long we wandered on the other side of the course.
Example:
It's a choppy day with winds at 15 knots. You are beam reaching on a course of 270 degrees. You will use course averaging and decide on a time interval of 20 minutes. You will start wandering to the right of your course.
Glance at your time. Steer between 270 degrees and 280 degrees. As soon as 20 minutes passes, change course to the left. Glance at your watch again. Now, steer between 270 degrees and 260 degrees for exactly 20 minutes. Change course back to the right when your time runs out. Continue this sequence until you reach the end of your course.
********************
Use the secret of course averaging when steering conditions get tough. You and your sailing crew will be rewarded with better steering accuracy, less fatigue, and a much more enjoyable time at the helm.
woodstock chimes motion activated sprinkler clothes drying rack
Monday, July 5, 2010
Rhino crash rollover flip jump
$ 360 in damage, cracked steering knuckle, rotor, roll cadge bar, and bent diff brackets happy to get it on video hell yea yamaha
Friday, June 11, 2010
Cimarron Jeep and 4x4 Club first run of 09
The CJ 4x4 had an impromptu run down the Arkansas River trail on 1-3-09 just to get out in the cold.... Filmed from the vantage point of the drivers side steering knuckle...
Thursday, May 20, 2010
10.5 LM main at Newreds hobbies
Some of the 10.5 latemodel main from 04/24/10 at the awesome Newreds hobbies indoor dirt oval track facility. Look at me getting a wheel knocked off at the 30 second mark, Yikes! I thought I had tangled with another car until I viewed this video and then I realized I wrecked myself and actually caused the hit that broke my right front axle clean off. That's a 3/16ths inch aluminum axle and it snapped clean of at the steering knuckle, Whaaacccckkk! Oh well I was getting my Arrrrrse handed to me that day anyway. I'll be back another day to try again. Makes me think of a song, You picked a fine time to leave me loose wheel. I think that's how it goes???? :-)
Subscribe to:
Posts (Atom)